Constant Voltage High Density LED Strips

QL Light Co.,Ltd is one of the leading China led ribbon lights manufacturers and suppliers with professional factory. Welcome to wholesale products from us.CRI≥90 Version: very suitable for the application that require high color rendering. It will give you a true color.◆ LED Type: SMD3528◆ Input Voltage: DC24V◆ Color: Green, Blue, Warm White, Nature White, Pure White◆ LED Qty: 240LED/m◆ Beam Angle: 120 degree◆ IP Ratio: IP20, IP67 Version◆ IP20: Non-waterproof Version◆ IP67: With Silicone TubeSpecifications:Color Rendering Testing Report:Different IP version:Applications:1. Decorative lighting for festivals, events, shows, exhibitions2. Architectural lighting for canopy, corridor, window, archway,3. Backlight or edge light for signage4. Path or contour marking5. Channel letter lightingLED Knowledge:  Copied from LED NEWS.ORG (www.lednews.org)Precautions during LED storage and usagePOSTED ON SEPTEMBER 7, 2013 BY ADMIN IN LED COMPONENT, LED KNOWLEDGE WITH THERE ARE NO COMMENTSLED is very sensitive electronic components, so must be very careful during storage and usage, otherwise it will cause the damp LED, puncture or death. And a lot of problem LEDs only can be found during usage.Storage:1. Moisture proof and anti-electrostatic package with moisture absorbent material must be used, to keep moisture usually can keep for 1 year if not open the package.2. Before opening the package, the LED should be kept at 30℃ or less and humidity less than 60%RH.3. After opening the package, the products should be soldered with 24 hours. If not, please store at 30 degree or less and humidity less than 10%RH. It is recommended that the LED be operated at the workshop condition of ≤30℃ and humidity less than 60%RH.4. If the moisture absorbent material has fade away or the LEDs HAVE exceeded the storage time, baking treatment should be performed based on the 80±5℃ for 24 hours.Static electricity during usage:Static electricity or surge voltage may damage the LEDs, damaged LED will show some unusual characteristics such as the forward voltage becomes lower, or the LED not light at the low current, or can’t be light up.All devices equipment and machinery must be properly grounded, at the same time, it is recommended that wrist bands or anti-electrostatic gloves, anti-electrostatic containers should be used during processing LEDs.