DC12V One-LED-Cut Strips

QL Light Co.,Ltd is one of the leading China led tape lights manufacturers and suppliers with professional factory. Welcome to wholesale products from us.CRI≥90 Version: very suitable for the application that require high color rendering. It will give you a true color.Each LED can be cut: the cutting length is only 1.67cm.◆ LED Type: CRI90 SMD5050◆ Input Voltage: DC12V◆ Color: Red, Green, Blue, Yellow, Warm White, Nature White, Pure White◆ LED Qty: 60LED/m◆ Beam Angle: 120 degree◆ IP Ratio: IP20, IP54. IP67 or IP68 Version◆ IP20: Non-waterproof Version◆ IP54: Single-Side glued with silicone◆ IP67: With Silicone Tube◆ IP68: With silicone tube and silicone glueSpecifications:Color Rendering Testing Report:Different IP version:Applications:1. Decorative lighting for festivals, events, shows, exhibitions2. Architectural lighting for canopy, corridor, window, archway,3. Backlight or edge light for signage4. Path or contour marking5. Channel letter lightingLED Knowledge:  Copied from LED NEWS.ORG (www.lednews.org)SMD LED PrecautionsPOSTED ON SEPTEMBER 28, 2013 BY ADMIN IN LED COMPONENT, LED KNOWLEDGE WITH THERE ARE NO COMMENTS1) Reverse voltage protectionIn generally, the reverse current of SMD LED is very small, it can’t effect using the component normally, but when it often suffered the reverse voltage which exceed the limited of the component than it will be damaged, the reverse current increases rapidly causing the string light display grayscale, so when designing, please pay attention to control the reverse voltage, we suggest the voltage less than 10V.2) The safe temperature for LEDs workingThe high temperature will make the LED’s luminous intensity decreased radlically, if LEDs worked in hot environment for a long time, they wil be disabled easily. When LEDs are working in a closed array, we suggest that the SMD LED surface temperature should be lower than 55 degree, and leg’s temperature should be lower than 75 degree.3) No direct touch or press on LED.When handling the product, touching the SMD LED with bare hands will not only contaminate its surface, but also effect on its optical characteristics. Excessive force to the LED may result in catastrophic failure to it due to die breakage or wire deformation. For this reason, please does not put excessive stress on LEDs, especially when the LED are heated such as during reflow soldering.The epoxy of encapsulant is fragile, so please avoid scratch or friction over the epoxy resin surface. Be careful when handing the product with tweezers, do not touch the epoxy resin.