3528 Temperature Sensor Constant Current LED Strips

QL Light Co.,Ltd is one of the leading China led strips 10 m manufacturers and suppliers with professional factory. Welcome to wholesale products from us.CRI≥90 Version: very suitable for the application that require high color rendering. It will give you a true color.Features of QL Constant Current Strips:1. Constant current version: with stable current, suitable for high quality requirements project.2. DC12V/DC24V input: Can work with any DC12V/DC24V PWM control system.3. can work with unstable power supply and without damage. 4. with temperature Sensor: Can lower the current to protect itself when the temperature is too high.5. Brightness uniform: With same brightness from the first end to the last end for around 10m.◆ LED Type: SMD3528◆ Input Voltage: DC24V◆ Color: Blue, Green, Warm White, Nature White, Pure White◆ LED Qty: 60LED/m, 120LED/m, 228LED/m◆ Beam Angle: 120 degree◆ IP Ratio: IP20, IP54. IP67 or IP68 Version◆ IP20: Non-waterproof Version◆ IP54: Single-Side glued with silicone◆ IP67: With Silicone Tube◆ IP68: With silicone tube and silicone glueSpecifications:Color Rendering Testing Report:Different IP version:Applications:1. Decorative lighting for festivals, events, shows, exhibitions2. Architectural lighting for canopy, corridor, window, archway,3. Backlight or edge light for signage4. Path or contour marking5. Channel letter lightingLED Knowledge: Copied from LED NEWS.ORG (www.lednews.org)LED bulb normal temperature, pressure and impact testing POSTED ON JULY 10, 2013 BY ADMIN IN LED KNOWLEDGE, LED LIGHTING WITH THERE ARE NO COMMENTSTest objects: LED bulbs (lamps with LED Driver, finished products).Test method:1) Put 5pcs LED bulbs under environment temperature of 25℃;2) Input the rated voltage to the LED lighting;3) Power on for 72 hours, and observe whether there is damage to the lamp, thermal deformation of materials and other anomalies;4) After the light on testing is the impact test, through the relay controller to control the LED bulb in this environment, the steps is: light on 30 seconds, light off 30 seconds, 10,000 times cycles.Test requirements:A: After impact test, LED lamps can not leakage, power off and other electrical anomalies.